Abstract
Stabilization of soil using fibers is one of the effective techniques to improve the strength of soils for engineering se. This paper aims to evaluate the effect of coir fiber as natural reinforcement in the stabilization of lateritic soil, which is classified as clayey silt. The performance of Coir fibers is separately analyzed for its impact on the strength of the soil. Tests were conducted on various fiber-soil ratios in six percentage levels such as 0, 0.2, 0.4, 0.6, 0.8 and 1.0 to determine the optimum fiber content. The index properties tests carried out on the natural soil samples (A and B) showed that the samples belong to A-6 and A-7-6 in the AASHTO classification system respectively and CL according to the Unified Soil Classification System (USCS). Compaction characteristics of the natural and treated soil samples were determined using the Standard Proctor method. Unconfined compressive strength (UCS) value of 58.59kpa and 87.89kpa obtained for the natural soil, increased to a maximum of 359.31kpa and 261.16kpa at 0.4% fiber content for samples A and B respectively. The California bearing ratio (CBR) values on the other hand increased with increase in fiber content from 14.52% to 23.28% and from 12.47% to 18.92% for soaked samples A and B respectively, and from 17.26% to 27.18% and 15.22% to 21.89% for unsoaked samples A and B respectively. The results indicate that, 0.4% coir fiber content are more optimal and efficient stabilizer for the laterite soil. This study also contributes to effective soil waste management as a befitting sustainable technique to solve current environmental crisis as well.
Downloads
Similar Articles
- W. C. Solomon, M. T. Lilly, J. I. Sodiki, Production of Asbestos-free Brake Pad Using Groundnut Shell as Filler Material , International Journal of Science and Engineering Invention: Vol. 4 No. 12 (2018)
- S. Rajpal Singh, M. Pradeep Kumar, R. Venumadhav, Performance Investigation of UTO as an Alternative Fuel in CI Engines , International Journal of Science and Engineering Invention: Vol. 2 No. 10 (2016)
- Rigoberto Pastor Sánchez Figueredo, Asdrubal Braulio GarcÃa DomÃnguez, Roberto Pérez RodrÃguez, Fausto Hernán Oviedo Fierro, Increase of the General Technological Yieldin the Securing of Gray Iron with Graphite Spheroidal for the Metódo of Spilled Vibratory , International Journal of Science and Engineering Invention: Vol. 2 No. 03 (2016)
- Chilee Ekwedigwe, Chidume Nwambu, Francis Osakwe, Eugene Nnuka, Mechanical Properties of Hybrid Rice Straw Fibre and Walnut Shell ASH Particulate/Epoxy Composite , International Journal of Science and Engineering Invention: Vol. 9 No. 01 (2023)
- Brijesh Bhavsar, Prof. Anurag Nema, Prof. Ketan Dhumal, Design and Development of Dual Purpose Gear Drive for Blister Machine Application , International Journal of Science and Engineering Invention: Vol. 2 No. 04 (2016)
- Sundaramoorthy N., Effect of Optimizing Nozzle Position in Jet Mixer using Hydrodynamic Studies , International Journal of Science and Engineering Invention: Vol. 2 No. 10 (2016)
- Vincent Chukwuemeka Ezechukwu, Tamunonimim Kelsy Braide, Chukwuemeka Chidozie Nwobi-Okoye, Multi-Response Optimization of Stir Casting Parameter of New Nanocomposites Formulation of Al-Si-Mg Alloy Reinforced with Synthesis Carbon Nanotube and Periwinkle Shell Nanoparticles via Taguchi-Grey Approach , International Journal of Science and Engineering Invention: Vol. 10 No. 10 (2024)
- Ali Mubarak Al-Qahtani, Jebaraj S., Oil Demand Forecasting in Malaysia in Transportation Sector Using Artificial Neural Network , International Journal of Science and Engineering Invention: Vol. 5 No. 02 (2019)
- Milos Gradimir Ivanovic, Dobrila Skataric Prof. dr, ICT in Optimization of Machines Movement at Open-Pit Coal Mine , International Journal of Science and Engineering Invention: Vol. 4 No. 05 (2018)
- Muhammet YÜRÜSOY, Symmetry Reduction and Analytical Solutions of Potential Kdv Equation , International Journal of Science and Engineering Invention: Vol. 3 No. 11 (2017)
You may also start an advanced similarity search for this article.
Copyrights & License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.