Abstract
One of the concerns of power system planners is the problem of optimum cost of generation as well as loss minimization on the grid system. This issue can be addressed in a number of ways; one of such ways is the use of reactive power support (shunt capacitor compensation). This paper used the method of shunt capacitor placement for cost and transmission loss minimization on Nigerian power grid system which is a 24-bus, 330kV network interconnecting four thermal generating stations (Sapele, Delta, Afam and Egbin) and three hydro stations to various load points. Simulation in MATLAB was performed on the Nigerian 330kV transmission grid system. The technique employed was based on the optimal power flow formulations using Newton-Raphson iterative method for the load flow analysis of the grid system. The results show that when shunt capacitor was employed as the inequality constraints on the power system, there is a reduction in the total cost of generation accompanied with reduction in the total system losses with a significant improvement in the system voltage profile.
Downloads
Most read articles by the same author(s)
- Ganiyu Adedayo Ajenikoko, Olayinka Titilola T, Effect of Real Power Loss Allocation on the Transfer Bus with Zero Injection Power , International Journal of Science and Engineering Invention: Vol. 2 No. 12 (2016)
Similar Articles
- Ganiyu Adedayo Ajenikoko, Olayinka Titilola T, Effect of Real Power Loss Allocation on the Transfer Bus with Zero Injection Power , International Journal of Science and Engineering Invention: Vol. 2 No. 12 (2016)
- H.T.N. Thuong, L.T. Nghia, P. T. Tan, T. T. Giang, N. P. B. Long, Determine the Location for Reactive Power Compensation in the Microgrid Based on the Hybrid Neural Network , International Journal of Science and Engineering Invention: Vol. 8 No. 01 (2022)
- M Neeharika, Prabhat Kumar Hensh, Estimation of Leakage Mass Flow Rate through Labyrinth Seal Using CFD Techniques , International Journal of Science and Engineering Invention: Vol. 3 No. 07 (2017)
- Zainab M. Gwoma , Kayode A. Popoola, Sunusi S. Adamu, M. Buhari, A Review of Torque Ripple Minimization Strategies in Switched Reluctance Machines , International Journal of Science and Engineering Invention: Vol. 9 No. 02 (2023)
- Vincent Chukwuemeka Ezechukwu, Tamunonimim Kelsy Braide, Chukwuemeka Chidozie Nwobi-Okoye, Multi-Response Optimization of Stir Casting Parameter of New Nanocomposites Formulation of Al-Si-Mg Alloy Reinforced with Synthesis Carbon Nanotube and Periwinkle Shell Nanoparticles via Taguchi-Grey Approach , International Journal of Science and Engineering Invention: Vol. 10 No. 10 (2024)
- Rawabi Salem Wasel Al-ahmadi, The Power Weighted Gompertz Model , International Journal of Science and Engineering Invention: Vol. 7 No. 01 (2021)
- Ting Huang, Xiao Guo, Bihui Zhou, Research on Flow Boundary of Different Kinds of Heavy Oil with Different Fluidities , International Journal of Science and Engineering Invention: Vol. 1 No. 01 (2015)
- Manyika Kabuswe Davy, Nawa Nawa, On the Future of Nuclear Energy and Climate Change: A Summary , International Journal of Science and Engineering Invention: Vol. 6 No. 03 (2020)
- Mohammad Anwar Zainudini, Analysis of River Damen Rate of flow and Rainfall Data for Flood Management from Makoran Iranshahr in the South East Iran , International Journal of Science and Engineering Invention: Vol. 2 No. 03 (2016)
- Georgeta Buica, Anca Elena Antonov, Constantin Beiu, Dobra Remus, Dragos Pasculescu, M. Ayaz Ahmad, Some Features of Non-Safety Costs in Maintenance of Work Equipments , International Journal of Science and Engineering Invention: Vol. 5 No. 04 (2019)
You may also start an advanced similarity search for this article.
Copyrights & License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.