Abstract
This study presents the design and simulation of a 1 MW grid-connected phasor-type wind turbine system using MATLAB/Simulink. The turbine is modelled with a line-to-line voltage of 400 V and operates at a frequency of 50 Hz, aligning with standards in India. Advanced features include high-temperature superconducting generators to reduce size and weight while maintaining efficiency with minimal losses. The aerodynamic design is optimized using blade element momentum (BEM) theory to enhance performance across various wind speeds. The simulation incorporates a step device for wind speed control and a rate limiter to regulate speed variations. Power flow is measured from the wind turbine to the grid, with a capacitor bank providing necessary reactive power. The results demonstrate that the system successfully delivers 1 MVA of power to the grid, confirming the effectiveness of the design and simulation parameters.
The analysis indicates that as wind speed drops below nominal levels, the pitch angle increases, and reactive power becomes negative, around -0.22. Real power decreases with wind speed, from 1 PU at 12 m/s to 0.495 PU at 10 m/s. At 14 m/s, real power exceeds from 1 PU. With a 400 kVAR capacitor bank, some reactive power is supplied by the grid; whereas at 1 VAR, the grid provides all required reactive power. For a wind speed of 12 m/s, the turbine's power measurement is about 163.2 kVA, while the grid measures 179.5 kVA which is reflecting minor reactive power losses. Ultimately, the wind turbine delivers approximately 0.96 MW of real power to the grid.
Downloads
Most read articles by the same author(s)
- Mahendra Kumar, Alok Kumar Singh, Shiv Lal, THD Reduction and Power Quality Enhancement in Solar-Wind Hybrid Systems: A Comprehensive Review , International Journal of Science and Engineering Invention: Vol. 11 No. 01 (2025)
Similar Articles
- Ali Hassan Sayed Morsy, Ph.D., The Linguistic Issues of Form and function and their Effect on Translating Conditional Structures in the Qur’an , International Journal of Science and Engineering Invention: Vol. 5 No. 03 (2019)
- Kenil Shah, Mayur Rane, Dr. Vahid Emamian, Detection of Heart Defects using Electrocardiogram (ECG) , International Journal of Science and Engineering Invention: Vol. 4 No. 11 (2018)
- Milos Ivanovic, MSc, Dr Sveta Mirkovic, Support to IS/IT in Auxiliary Machinery Exploitation Mangement at the Open-Pit Coal Mine , International Journal of Science and Engineering Invention: Vol. 5 No. 03 (2019)
- Seroor Atalah Khaleefa Alia, Dr. Mohammed Ibrahimb, Hussein Ali Hussein, Parameters Affecting Dye Adsorption - Using Graphene Coated Sand (GSC) , International Journal of Science and Engineering Invention: Vol. 4 No. 03 (2018)
- S. Jagadesan, M. V. Subramanian, Study on Sunspots, Ozone and earth atmosphere variation at Pudukkottai, Tamilnadu (latitude: 10 0 23’ and longitude 78 0 52’) , International Journal of Science and Engineering Invention: Vol. 2 No. 08 (2016)
- Veena Vijayan, Suguna Yesodharan, E. P. Yesodharan, Solar photocatalysis mediated by ZnO for the removal of last traces of Indigo carmine dye pollutant from water , International Journal of Science and Engineering Invention: Vol. 4 No. 04 (2018)
- Sandoval Cuji Martha Matilde, Fajardo Arriaga Julia del RocÃo, Sandoval Cuji Mónica MarÃa, Zambrano Medranda Luis Amable, Diagnosis of Competitive Strategies of SMEs - Quevedo , International Journal of Science and Engineering Invention: Vol. 3 No. 08 (2017)
- Marisol Betty Véliz Aguilar, Freddy Jeovanny Fares Vargas, Paula Marisol Plaza Zambrano, Ethical and Moral Values ​​in the Teaching Process - Learning in Higher Education , International Journal of Science and Engineering Invention: Vol. 3 No. 02 (2017)
- S. Jagadesan, Dr. M. V. Subramanian, K. Aruna, Air Ions Variation at Different Sites in Pudukkottai , International Journal of Science and Engineering Invention: Vol. 2 No. 09 (2016)
- Md. Anisur Rahman, Momotaz Khan, Md. Tanjil Sarker, Dr. Zahid Hasan Mahmood, Design, Inspection and Implementation of Solar PV Driven Smart & Automated Irrigation Systems , International Journal of Science and Engineering Invention: Vol. 2 No. 05 (2016)
You may also start an advanced similarity search for this article.
Copyrights & License

This work is licensed under a Creative Commons Attribution 4.0 International License.